NTU SAM Lab 國立臺灣大學智慧與先進製造實驗室
  • 歡迎 Welcome
  • 最新消息 News
  • 團隊 Members
    • 實驗室主持教授 Group Leader
    • 博士生 PhD student
    • 碩士生 Master students
    • 畢業生 Alumni
  • 研究主題 Research
  • 研究成果 Publications
  • 教學 Teaching
    • Principles of Engineering Production 製造原理
    • Manufacturing Processes 機械製造
    • Additive Manufacturing 積層製造
  • 聯繫 contact

研究成果 Publications

by samlab

Journal Publications

  • J1. Huang TH, Hsieh HL, Huang CT, Hou YL, Li DR*. A Modular Wireless Pressure Sensing Framework with Surface-
    Dependent Calibration for Data-Guided Pressure Injury Monitoring. IEEE Transactions on Biomedical Engineering.
    2026 Sep 24. (Link)
  • J2. Lawrence A, Huang ST, Li DR, Yan J. A multi-GPU-centric finite element multiphysics modeling framework for vat
    photopolymerization. Additive Manufacturing. 2026 Sep 4:105361. (Link)
  • J3. Hong CY, Chou CH, Wang YJ, Wu KL, Yang SJ, Chang CH, Li DR. An experimental cadaveric limb motion platform for
    detecting altered mechanical responses under small-joint defect conditions. Medical Engineering & Physics. 2026
    Sep 1;147(9):095006. (Link)
  • J4. Cheng CT, Li DR*. Real-Time Machine Learning-Based Prediction and Adaptive Control for Process Parameter
    Optimization in Vat Photopolymerization. Additive Manufacturing. 2026 May 22:105253. (Link)
  • J5. Chang SY, Lai YC, Huang YB, Wang TW, Chou YJ, Li DR*. Additive biofabrication of silicone scaffolds for tissue
    engineering: from mold casting to direct ink writing. Journal of Micromechanics and Microengineering. 2026 Mar
    1;36(3):035014. (Link)
  • J6. Huang CT, Li DR*. Optimized Material Extrusion on Configurable and Discretized Platforms: A Novel System for
    Support-Reduced Additive Manufacturing. Rapid Prototyping Journal, Vol. ahead-of-print No. ahead-of-print. 2025
    Oct 27. (Link)
  • J7. Fu TH, Li DR*. Real-time process monitoring and error correction in material extrusion-based additive manufacturing
    via multi-output machine learning. Journal of Manufacturing Processes. 2025 Oct 30;152:638-56. (Link)
  • J8. Huang WJ, Li DR*. In-situ monitoring and correction of geometric deviations in material extrusion additive
    manufacturing. Rapid Prototyping Journal. 2025 May 7. (Link)
  • J9. Lin MJ, Li DR*. In situ optical monitoring for geometric accuracy and error detection in extrusion-based additive
    manufacturing. The International Journal of Advanced Manufacturing Technology. 2025 Jun 26:1-24. (Link)
  • J10. Vietanti F, Lee YJ, Huang YB, Wang TW, Li DR, Chou YJ. Effect of Zr dopant on in vitro cytotoxicity and neurogenic
    property of spray-dried bioactive glass microspheres. Ceramics International. 2025 Jul 1;51(16):22539-45. (Link)
  • J11. Huang WL, Vietanti F, Li DR, Wang TW, Chou YJ. Enhancement of in vitro bioactivity and cytotoxicity of mesoporous
    bioactive glass through template-free spray drying synthesis. Journal of Non-Crystalline Solids. 2024 Oct
    1;641:123135. (Link)
  • J12. Powell AR, Srinivasan S, Helman JL, Li AD, O’Brien LM, Shih A, Plott JS, Zopf DA. Novel treatment for hypotonic
    airway obstruction and severe obstructive sleep apnea using a nasopharyngeal airway device with 3D printing
    innovation. Journal of Clinical Sleep Medicine. 2022 Jul 22:jcsm-10202. (Link)
  • J13. Chen L, Li AD, Symonds C, Holmes JR, Weick JW. Comparison of k‐wire insertion using oscillatory and unidirectional
    drilling modes under constant thrust force. Journal of Orthopaedic Research®. 2022 Jun;40(6):1301-11. (Link)
  • J14. Chen L, Hartner JP, Dong TK, Li AD, Watson BO, Shih AJ. Flexible High-Resolution Force and Dimpling Measurement
    System for Pia and Dura Penetration During In Vivo Microelectrode Insertion Into Rat Brain. IEEE Transactions on
    Biomedical Engineering. 2021 Apr 2;68(8):2602-12. (Link)
  • J15. Li AD, Liu Y, Plott J, Chen L, Montgomery JS, Shih A. Multi-Bevel Needle Design Enabling Accurate Insertion in
    Biopsy for Cancer Diagnosis. IEEE Transactions on Biomedical Engineering. 2021 Jan 28;68(5):1477-86. (Link)
  • J16. Li AD, Putra KB, Chen L, Montgomery JS, Shih A. Mosquito proboscis-inspired needle insertion to reduce tissue
    deformation and organ displacement. Scientific Reports. 2020 Jul 22;10(1):1-4. (Link)
  • J17. Li ADR, Plott J, Chen L, Montgomery JS, Shih A. Needle deflection and tissue sampling length in needle biopsy.
    Journal of the Mechanical Behavior of Biomedical Materials. 2020 Jan 11:103632. (Link)
  • J18. Liu Y, Zheng Y, Li ADR, Liu Y, Savastano LE, Shih AJ. Cutting of blood clots – Experiment and smooth particle
    Galerkin modelling. CIRP Annals. 2019 Apr 21. (Link)

Journal Papers under Review/Revision

R1. Yeh PS, Hsu CH, Hsieh CH, Li DR*. An AI-Enabled Closed-Loop Framework for Real-Time Extrusion Monitoring and Flow Correction in Robotic Multi-Axis Material Extrusion Additive Manufacturing. Journal of Intelligent Manufacturing. (Submitted on 2026 Jul 03, under revision)

Conference Proceedings

  • C1. Cheng CT, Li DR*. Machine Learning–Driven Real-Time Prediction and Optimization in Photopolymer Additive
    Manufacturing. The Second Taiwan Lamination Manufacturing Academic Conference. December 20, 2025, Taipei,
    Taiwan. (Oral Presentation)
  • C2. Cheng CT, Li DR*. Real Time Process Parameter Prediction and Optimization in Photopolymer Additive
    Manufacturing via Machine Learning. The 22th International Conference on Automation Technology (Automation
    2025), November 28-30, 2025, Kaohsiung, Taiwan. (Oral Presentation)
  • C3. Yeh PS, Hsu CH, Hsieh CH, Li DR*. Deep Learning-Enabled Real-Time Process Monitoring and Error Correction in
    Robotic Additive Manufacturing. The 22th International Conference on Automation Technology (Automation 2025),
    November 28-30, 2025, Kaohsiung, Taiwan. (Oral Presentation)
  • C4. Chang SY, Li DR*. Towards Additive Manufacturing of Piezoelectric Metamaterials for Soft Wearable Sensors: A Vat
    Photopolymerization Feasibility Study. The 49th National Conference on Theoretical and Applied Mechanics (CTAM
    2025), November 20-21, 2025, Miaoli, Taiwan. (Oral Presentation)
  • C5. Huang CT, Li DR*. Discrete Platform-Based Fused Filament Fabrication for Additive Manufacturing. The 48th
    National Conference on Theoretical and Applied Mechanics (CTAM 2024), November 29-30, 2024, Hsinchu, Taiwan.
    (Oral Presentation)
  • C6. Fu TH, Huang WJ, Li DR*. Real-Time Vision-Based Error Detection and Correction in Material Extrusion Additive
    Manufacturing. The 21th International Conference on Automation Technology (Automation 2024), November 22-24,
    2024, Taipei, Taiwan. (Oral Presentation)
  • C7. Fu TH, Huang TY, Li DR*. Machine Learning-Enabled Process Monitoring and Error Detection in Material Extrusion-
    Based Additive Manufacturing. Proceedings of the ASME 2024 International Mechanical Engineering Congress &
    Exposition, IMECE 2024, November 17-21, 2024, Portland, Oregon, USA.
  • C8. Chang SY, Lai YC, Huang YB, Wang TW, Chou YJ, Li DR*. Design and Fabrication of Silicone-Based Bioscaffolds Using
    Additive Manufacturing (poster). ASME 2024 International Mechanical Engineering Congress & Exposition, IMECE
    2024, November 17-21, 2024, Portland, Oregon, USA.
  • C9. Liu Y, Li DR. Review of interventional robotic systems. Proceedings of the ASME 2023 International Manufacturing
    Science and Engineering Conference, MSEC2023, June 12-16, 2023, New Brunswick, New Jersey, USA.
  • C10. Weick JW, Li ADR, Symonds C, Holmes J, Chen L. Comparison of K-wire insertion using oscillatory and
    unidirectional drilling modes under constant thrust force (poster). Proceedings of the American Academy of
    Orthopaedic Surgeons 2020 Annual Meeting, AAOS 2020, March 24-28, Orlando, Florida, USA.
  • C11. Nourmohammadi Z, Li ADR, Plott J, Powell A, Shih A, Zopf D. Self-Supported Nasopharyngeal Airway Device for
    Treatment of Hypotonic Upper Airway Obstruction. Proceedings of the 4th CIRP Conference on BioManufacturing,
    CIRP2019, December 11-15, Hong Kong, China.
  • C12. Lyu JJ, Zheng Y, Liu Y, Wu X, Li ADR, Shih A. A Miniature Nickel-Diamond Electroplated Wheel for Grinding of The
    Arterial Calcified Plaque. Proceedings of the NAMRC 47 International Advanced Manufacturing Conferences,
    NAMRC 47, June 10-14, 2019, Erie, Pennsylvania, USA.
  • C13. Villacis N, Li ADR, Shih A. Needle Computer Numerical Control Microgrinding with Vision-Guided Method (Poster).
    Proceedings of the MSEC 2019 International Advanced Manufacturing Conferences, MSEC 2019, June 10-14, 2019,
    Erie, Pennsylvania, USA.
  • C14. Li DR, Tian X, Wang H, Plott J, Shih A. Five-Axis Extrusion-Based Additive Manufacturing of Silicone 3D Contour
    Nonwoven Fabrics. Proceedings of the ASME 2018 International Manufacturing Science and Engineering
    Conference, MSEC2018, June 18-22, 2018, College Station, Texas, USA.
  • C15. Li DR, Yeh JK, Putra K, Shih A. Optical Measurement of Tissue Deformation in Needle Insertion. Proceedings of the
    3rd CIRP Conference on BioManufacturing, CIRP2017, July 11-14, Chicago, Illinois, USA.
  • C16. Li DR, Yeh JK, Lin WC, Montgomery JS, Shih A. An Experimental Method of Needle Deflection and Prostate
    Movement Using the Anatomically Accurate Prostate Simulator and the Electromagnetic Tracking System.
    Proceedings of the ASME 2017 International Manufacturing Science and Engineering Conference, MSEC2017, June
    4-8, 2017, Los Angeles, California, USA.
  • C17. Li DR, Yeh JK, Plott J, Shih A. Cold Acetone Vapor Chemical Polishing of Acrylonitrile Butadiene Styrene (ABS)
    Surfaces Fabricated by Fused Deposition Modeling. Proceedings of 2017 World Congress on Micro and Nano
    Manufacturing Joint Conference, WCMNM 2017, March 27-30, 2017, Kaohsiung, Taiwan.
  • C18. Chisena R, Li DR, Shih A. Nano-Computed Tomography Inspection of Short Carbon-Fiber Filled Nylon for Fused
    Deposition Modeling Method. Proceedings of 2017 World Congress on Micro and Nano Manufacturing Joint
    Conference, WCMNM 2017, March 27-30, 2017, Kaohsiung, Taiwan.
  • C19. Chisena R, Li DR. Throughout Optimization for Additive Manufactured Ankle Foot Orthotics (Poster). Proceedings
    of the Manufacturing Engineering Division (MED) of ASME’s 11th Manufacturing Science and Engineering
    Conference, MSEC2016, June 27- July 1, 2016, Blacksburg, Virginia, USA.

Patents

  • P1. Hsiao HM, Kao HL, Lee KH, Li DR, inventors; National Taiwan University, assignee. METHOD AND WEARABLE
    APPARATUS FOR DISEASE DIAGNOSIS. U.S. Utility Patent No. US20160078622A1.
  • P2. Li DR, Huang CT, inventors; National Taiwan University, assignee. ADDITIVE MANUFACTURING APPARATUS AND
    METHOD FOR REDUCING SUPPORT MATERIAL. Taiwan Invention Patent No. I909705.
  • P3. Zopf D, Powell A, Li DR, Plott J, Shih A, inventors; University of Michigan, assignee. NASAL AIRWAY DEVICE AND KIT.
    U.S. Utility Patent No. US20250235645A1. (pending)
  • P4. Plott J, Li DR, Zopf D, inventors; University of Michigan, assignee. NASOPHARYNGEAL AIRWAY DEVICES. U.S. Utility
    Patent No. US20220378598A1. (pending)

Share FacebookTwitterPinterestEmail

關於我 About Me

關於我 About Me

Assistant Professor Dian-Ru Li

李典儒助理教授

最近文章 Recent Posts

  • Congratulations to Chen-Ye Hong and Chih-Hao Chou ...

    2026-10-12
  • Thank You to Prof. Bruce L. Tai for His Visit to N...

    2026-07-21
  • Congratulations to Chun-Tse Cheng on his publicati...

    2026-06-04
  • Congratulations to Shu-Yi Chang on her publication...

    2026-06-04
  • 2025 UAAT & UI Smart Additive Manufacturing fo...

    2025-12-15

文章分類 Categories

  • 儀器設備 Facilities (6)
  • 參訪 Visit (8)
  • 團隊吃喝玩樂 Team Building (5)
  • 團隊會議 Meeting (2)
  • 團隊獲獎 Award (13)
  • 學術研討會 Conference (5)
  • 教學 teaching (2)

彙整

  • 2026 年 10 月
  • 2026 年 7 月
  • 2026 年 6 月
  • 2025 年 12 月
  • 2025 年 11 月
  • 2025 年 8 月
  • 2025 年 7 月
  • 2025 年 5 月
  • 2025 年 4 月
  • 2025 年 3 月
  • 2024 年 12 月
  • 2024 年 11 月
  • 2024 年 10 月
  • 2024 年 8 月
  • 2024 年 5 月
  • 2024 年 3 月
  • 2023 年 8 月
  • 2023 年 4 月
  • 2023 年 1 月
  • 2022 年 12 月
  • 2022 年 11 月
  • 2022 年 10 月
  • 2022 年 9 月

@2024 by Dian-Ru Li, SAM Lab


Back To Top
NTU SAM Lab 國立臺灣大學智慧與先進製造實驗室
  • 歡迎 Welcome
  • 最新消息 News
  • 團隊 Members
    • 實驗室主持教授 Group Leader
    • 博士生 PhD student
    • 碩士生 Master students
    • 畢業生 Alumni
  • 研究主題 Research
  • 研究成果 Publications
  • 教學 Teaching
    • Principles of Engineering Production 製造原理
    • Manufacturing Processes 機械製造
    • Additive Manufacturing 積層製造
  • 聯繫 contact